NSX DevStack Configurations¶
Below are the options for configuring the NSX plugin with DevStack. Prior to doing this DevStack needs to be downloaded. After updating the relevant configuration file(s) run ./stack.sh
NSXv¶
LBaaS v2 Driver¶
Add lbaas repo as an external repository and configure following flags in local.conf
:
[[local]|[localrc]]
enable_plugin neutron-lbaas https://git.openstack.org/openstack/neutron-lbaas
enable_service q-lbaasv2
- Configure the service provider::
- [[post-config|$NEUTRON_LBAAS_CONF]] [service_providers] service_provider = LOADBALANCERV2:VMWareEdge:neutron_lbaas.drivers.vmware.edge_driver_v2.EdgeLoadBalancerDriverV2:default
QoS Driver¶
Enable the qos in local.conf
:
[[local|localrc]]
ENABLED_SERVICES=q-qos
For NSXv set the service plugin in local.conf
, and enable the dvs features:
[[post-config|$NEUTRON_CONF]]
[DEFAULT]
service_plugins = vmware_nsxv_qos
[[local|localrc]]
NSXV_USE_DVS_FEATURES = True
Optional: Update the nsx qos_peak_bw_multiplier in nsx.ini (default value is 2.0):
[NSX]
qos_peak_bw_multiplier = <i.e 10.0>
L2GW Driver¶
Add networking-l2gw repo as an external repository and configure following flags in local.conf
:
[[local|localrc]]
enable_plugin networking-l2gw https://github.com/openstack/networking-l2gw
ENABLED_SERVICES+=l2gw-plugin
NETWORKING_L2GW_SERVICE_DRIVER=L2GW:vmware-nsx-l2gw:vmware_nsx.services.l2gateway.nsx_v.driver.NsxvL2GatewayDriver:default
IPAM Driver¶
Update the local.conf
file:
[[post-config|$NEUTRON_CONF]]
[DEFAULT]
ipam_driver = vmware_nsxv_ipam
Flow Classifier¶
Update the local.conf
file:
[[local|localrc]]
enable_plugin networking-sfc https://git.openstack.org/openstack/networking-sfc master
[[post-config|$NEUTRON_CONF]]
[DEFAULT]
service_plugins = networking_sfc.services.flowclassifier.plugin.FlowClassifierPlugin
[flowclassifier]
drivers = vmware-nsxv-sfc
[nsxv]
service_insertion_profile_id = <service profile id. i.e. serviceprofile-1>
In order to prevent tenants from changing the flow classifier, please add the following lines to the policy.json file:
"create_flow_classifier": "rule:admin_only",
"update_flow_classifier": "rule:admin_only",
"delete_flow_classifier": "rule:admin_only",
"get_flow_classifier": "rule:admin_only"
FWAAS (V1) Driver¶
Add neutron-fwaas repo as an external repository and configure following flags in local.conf
:
[[local|localrc]]
enable_plugin neutron-fwaas https://git.openstack.org/openstack/neutron-fwaas
ENABLED_SERVICES+=,q-fwaas
[[post-config|$NEUTRON_CONF]]
[DEFAULT]
service_plugins = neutron_fwaas.services.firewall.fwaas_plugin.FirewallPlugin
[fwaas]
enabled = True
driver = vmware_nsxv_edge
Neutron dynamic routing plugin (bgp)¶
Add neutron-dynamic-routing repo as an external repository and configure following flags in local.conf
:
[[local|localrc]]
enable_plugin neutron-dynamic-routing https://git.openstack.org/openstack/neutron-dynamic-routing
DR_MODE=dr_plugin
BGP_PLUGIN=vmware_nsx.services.dynamic_routing.bgp_plugin.NSXvBgpPlugin
[[post-config|$NEUTRON_CONF]]
[DEFAULT]
api_extensions_path = $DEST/neutron-dynamic-routing/neutron_dynamic_routing/extensions
Neutron VPNaaS¶
Add neutron-vpnaas repo as an external repository and configure following flags in local.conf
:
[[local|localrc]]
enable_plugin neutron-vpnaas https://git.openstack.org/openstack/neutron-vpnaas
NEUTRON_VPNAAS_SERVICE_PROVIDER=VPN:vmware:vmware_nsx.services.vpnaas.nsxv.ipsec_driver.NSXvIPsecVpnDriver:default
NSXv3¶
QoS Driver¶
Enable the qos in local.conf
:
[[local|localrc]]
ENABLED_SERVICES=q-qos
[[post-config|$NEUTRON_CONF]]
[DEFAULT]
service_plugins = neutron.services.qos.qos_plugin.QoSPlugin
Optional: Update the nsx qos_peak_bw_multiplier in nsx.ini (default value is 2.0):
[NSX]
qos_peak_bw_multiplier = <i.e 10.0>
L2GW Driver¶
Add networking-l2gw repo as an external repository and configure following flags in local.conf
:
[[local|localrc]]
enable_plugin networking-l2gw https://github.com/openstack/networking-l2gw
ENABLED_SERVICES+=l2gw-plugin
NETWORKING_L2GW_SERVICE_DRIVER=L2GW:vmware-nsx-l2gw:vmware_nsx.services.l2gateway.nsx_v3.driver.NsxV3Driver:default
DEFAULT_BRIDGE_CLUSTER_UUID=
IPAM Driver¶
Update the local.conf
file:
[[post-config|$NEUTRON_CONF]]
[DEFAULT]
ipam_driver = vmware_nsxv3_ipam
Trunk Driver¶
Enable trunk service and configure following flags in local.conf
:
[[local]|[localrc]]
# Trunk plugin NSXv3 driver config
ENABLED_SERVICES+=,q-trunk
Q_SERVICE_PLUGIN_CLASSES=trunk
FWAAS (V1) Driver:¶
Add neutron-fwaas repo as an external repository and configure following flags in local.conf
:
[[local|localrc]]
enable_plugin neutron-fwaas https://git.openstack.org/openstack/neutron-fwaas
ENABLED_SERVICES+=,q-fwaas
[[post-config|$NEUTRON_CONF]]
[DEFAULT]
service_plugins = neutron_fwaas.services.firewall.fwaas_plugin.FirewallPlugin
[fwaas]
enabled = True
driver = vmware_nsxv3_edge
LBaaS v2 Driver¶
Add lbaas repo as an external repository and configure following flags in local.conf
:
[[local]|[localrc]]
enable_plugin neutron-lbaas https://git.openstack.org/openstack/neutron-lbaas
enable_service q-lbaasv2
- Configure the service provider::
- [[post-config|$NEUTRON_LBAAS_CONF]] [service_providers] service_provider = LOADBALANCERV2:VMWareEdge:neutron_lbaas.drivers.vmware.edge_driver_v2.EdgeLoadBalancerDriverV2:default